Padlock Saver

The Solution is here!

Welcome.

The Padlock Saver was created to cover a padlock and to help eliminate the frustrations involved in dealing with padlocks exposed to the environment. We all know that padlocks rust, corrode and freeze which usually leaves us no choice but to cut them off.

The Padlock Saver will cover your padlocks and help protect it from the elements of rain, freezing rain, snow, the sun and UV rays. The Padlock Saver will help to prevent your padlocks from freezing and rusting.

Innovation

The applications for the Padlock Saver are endless. The Padlock Saver can be used to help protect your padlocks from the elements on garden sheds, storage sheds, job site sheds, fences, gates, storage units, garage doors, utility boxes, truck storage units, job boxes, trailer doors, almost anywhere a padlock needs protecting from the elements.

Design

The Padlock Saver is manufactured using a very durable polymer that can withstand the elements. The product will remain flexible in temperatures down to -40 degrees Celsius.

The Padlock Saver will help to protect and cover padlocks as large as 3.75 inches high by 2.5 inches wide.

Patent

The Padlock Saver is patented under US Patent Number 8,438,884.



Back to Top

Installation Instructions.


Proper installation of the Padlock Saver is required in order to help protect your padlock from the elements of rain, freezing rain, snow, the sun and UV rays. To help in the installation of the Padlock Saver, weve included two # 8 wood screws and two # 8 flat washers for installation on a wood or plastic surface.

Please visit the Gallery page to view some installation videos.

1.0

a) The Installation of the Padlock Saver is very simple. A red robertson screwdriver, a pair of scissors and the # 8 screws and washers that are included in the packaging are all that is required for the installation.

2.0

a) Determine which side of the Padlock Saver the hasp will be located.
Figure 1a - L/H install.
Figure 1b - R/H install.

Figure 1a                   Figure 2a

3.0

a) Only remove the flap on the hasp side. Using a pair of scissors, cut along the notched line at the top and bottom of the hasp cutout. Do not cut into raised edge along the sides of flap.


4.0

a) Now slowly tear the flap from the Padlock Saver until it is completely removed. Do not tear it off too fast or with excessive force to avoid damaging the Padlock Saver.


5.0

a) Centre Padlock Saver over hasp and lock. Secure cover over padlock and hasp with screws and washers provided through holes on top edge.



6.0

a) Ensure free movement of cover when opening and closing.





Back to Top

Where to Buy.



Online

Back to Top

FAQ.



Frequently Asked Questions


 
Q. What size padlock and hasp will the Padlock Saver protect?
   
A. Padlocks as large as 2.5 inches wide by 3.75 inches high and hasps as large as 2 inches high by .5 of an inch thick.
   

 
Q. What type of applications can the Padlock Saver be used for?
   
A. Practically any application that involves a hasp mounted horizontally with a padlock secured to it needing protection from the elements.
   

   
Q. What is the Padlock Saver made of and is it durable?
   
A. The Padlock Saver is made from a very durable polymer that can withstand the elements and everyday wear and tear. It will remain flexible in temperatures down to -40 degrees Celsius.
   

   
Q. How long will a padlock last using the Padlock Saver?
   
A. The key to the longevity of a padlock is keeping it away from continuous exposure to the elements. Due to the many factors out of our control with regards to how an individual installs and uses the Padlock Saver and the condition of the existing lock, it is very difficult for us to give a time frame for how long a padlock will last. However, with a new lock and proper installation and use of the Padlock Saver your padlock will give you trouble free operation from weather related issues for a very long time.
   
  Note:  If your current padlock is in poor condition or contaminated
with grime and oil products we strongly recommend installing a new
padlock to ensure trouble free operation.  A new padlock will not
require any lubricating products when protected under the Padlock Saver.


   
Q. Does the Padlock Saver come in different colors?
   
A. At this time the Padlock Saver only comes in the black.
   

   
Q. What is the warranty on the Padlock Saver?
   
A. Padlock Saver is warranted to be free of defects in materials or workmanship for a period of 180 days. If the product fails due to a defect in materials or workmanship during the 180 day time period replacement will be free of charge. This warranty does not cover products which have been abused, damaged, misused or cut in a manner not in keeping with the installation instructions.
   

   
Q. Does the Padlock Saver come with any hardware to install it?
   
A. The Padlock Saver comes with 2 # 8 wood screws and 2 # 8washers for installation on a wood or plastic surface. For installation on a metal surface you will have to determine and purchase the proper hardware needed for your particular setup.
   

   
Back to Top

Product Disclaimer.



The information contained in this website is for general information purposes only.

The information is provided by Deber Manufacturing Inc. and while we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose.

Any reliance you place on such information is therefore strictly at your own risk. Deber Manufacturing Inc. makes no other warranties or representations of any kind whatsoever, expressed or implied, with respect to any item associated with the use of the Padlock Saver.

Deber Manufacturing Inc. makes no claims or warranties whatsoever for the longevity and condition of products, such as hasps or padlocks, used in conjunction with the Padlock Saver.

The total liability of Deber Manufacturing Inc. shall not exceed the purchase price of the component upon which liability is based. In no event shall Deber Manufacturing Inc. be liable for consequential, incidental or special damages.

Back to Top

Product Warranty.



Padlock Saver is warranted to be free of defects in materials or workmanship for a period of 180 days. If the product fails due to a defect in materials or workmanship during the 180 day time period, replacement will be free of charge.

This warranty does not cover products which have been abused, damaged, misused or cut in a manner not in keeping with the installation instructions.

Back to Top

Contact Us.

Please fill in the following form to contact us


* Are you human?


Back to Top